TA-4H spine

To fill in the gap caused by cutting out the avionics hump, started with some 0.1 sheet styrene.  Then I marked where the panel lines would be.  Snagged the extra vent from the Hasegawa TA-4J.  Cut out and trimmed a hole for the vent.  Then glued the vent in.  The small hole I drilled is to mark where the anti-collision light will go.  Once the fuselage is all together will finish up trimming and gluing the new spine.  Add the light.  Then will get to add the MissingLink resin canopy fairing.